|
Centrifuge floor model refrigerated, sold as refurbished
CB1 – Centrifuge, Floor Model, Beckman Model J-6B

- Long drive and brush life
- Broad temperature range
- Easy maintenance and repair
- Built in speed calibration check
- Wide choice of rotors, tubes, and adapters
- Adjustable overtemp shutdown protection
- Minimum maintenance
- Quiet operation
Specifications:
- Maximum speed : 6000 rpm
- Minimum speed : 600 to 800 rpm
- Maximum RCF : 6840 x g
- Max. rotor capacity: 6 liters
- Braking system : electronic, variable braking
- Temp. control range : 0 to 40 ° C at full speed
- Ambient range : 16 ° C to 38 °C
Fully refurbished, with 90 day warranty.
Centrifuge, Floor Model, Refrigerated, Sorvall RC 3B plus 
Max. Speed 6,000rpm
Max. Force 7.280 g
Control Range 100rpm increments
Braking Variable Dynamic
Speed Control Dial Control +/-1% or 20rpm
Temp. Control -10 to +30 degC Dial depending on rotor
Timer 0-30 mins. & Hold
It accepts 12 different Sorvall Rotors: 4 slow speed swinging bucket rotors; 1 tube rack rotor; 1 biocontainment rotor; 4 fixed angle and 2 swinging bucket Superspeed rotors from the RC-5x family. Tube capacity varies from as small as 1.5mL to as large as 6x1,000mL. Offers biohazard protection and environmentally compliant refrigerant. Centrifuge, Floor Model, Refrigerated, Sorvall RC 5 
Max Speed 21,000rpm, 51,430 rcf x g.
Max Capacity 4 x 1000ml
Durable, high capacity refrigeration system maintains precise operating temperatures.
Centrifuge, Floor Model, Refrigerated, Sorvall RC 5B 
Max. Speed 21-000 rpm
Max. Force 51070
Measurement Channels 4
Max. Rotor Capacity 4 independent alarmed timers
Accel/decel rates : 1 acceleration- 2 deceleration
Speed range rpm : 500-21000
Speed control accuracy : +/- 1 percent or 100 rpm- whichever is greater
Temperature set range C : -20 to +40
Temperature control C : +2 to +37 at maximum rotor speed
Temperature accuracy C : +/-2
Amb temperature range C : 15 - 38
H x D x W inch 45 x 39 x 30
Weight 680Ilbs
Centrifuge, Floor Model, Refrigerated, Sorvall RC 5C

Speed Range: 50 to 21,000 rpm; increments of 10 rpm
Max. RCF 51,427 x g
High-torque, direct drive DC motor; 1.86 kw (2.5hp)
Braking system: Dynamic, electric brake
Refrigeration system . Heavy-duty sealed compressor: 1.49kw (2hp)
Set Speed control accuracy: ±100 rpm or 1%, whichever is greater
Temperature set range: -20ºC to 40ºC
Temperature control range: 2ºC to 40ºC at max. rotor speed
Temperature control accuracy: ±1ºC of set temperature (after stabilization)
Automatic rate control: acceleration control to 500 rpm; deceleration control from 700 rpm
Timer: digital; 0 to 99 hr, 59 min for TIMED RUNS (displays remaining time); HOLD (displays elapsed time
Max. capacity 4 liters
Rotor Compatability:
Superspeed rotors:
Fixed Angle: SE-12, SA-300, SS-34, SM-24, SH.MT, F-20.Micro, SA-600, SLA- 1000, SLA-1500, SLA-3000, GSA, GS-3, SLA-600TC,
SLC-4000
Swinging Bucket: SH-80, HB-6, SH-3000, HS-4
Vertical: SV-80, SV-288
Zonal: TZ-28
Continuous-flow: SS-34/KSB, TZ-28/GK
SUPRAspeed® rotors
Fixed-angle: F-28/13, F-28/36, F-28/50, F-16/250
Swinging-bucket: S-20/17, S-20/20, S-20/36
Watts: 4368
Volts: 208
Amps: 30
Hz: 60 Centrifuge, Floor Model, IEC, Model B-22, High Speed Refrigerated
Reach speeds of 22,000 rpm/49,300xg
For volumes up to 3L (6 x 500ml)
Large selection of rotors and adapters
| Capacity |
6 x 500m; |
| Max. Tube Size (Dia. x L) |
69.7x166mm |
| Max. Speed |
22,000rpm |
| Max. Force (rcf) |
49,300xg |
| Speed Control |
Variable |
| Timer: Range |
0 to 999 min. , Resolution 1 min. |
| Refrigerated |
Yes |
| Temperature Range |
-9° to +39°C
(+16° to +102°F) |
| Types of Rotors |
Angle, Horizontal, Basket |
| Dimensions |
86.4L x 72.4W x 109H cm
(34 x 28½ x 43?) |
| Electrical |
220-240 V, 50/60Hz |
| Warranty |
90 days |
| Condition |
Refurbished |
This model is equipped with a powerful motor, which can create forces of 49,300xg
when equipped with 05-110-07 rotor. It accommodates loads up to 3L (6 x 500ml). Two
acceleration and five deceleration rates are available to ensure gentle rotor movement and to protect your sensitive samples. And to repeat a cycle using the same parameters, simply press the Start Key. The built-in Refrigeration system maintains temperatures between –9 ° to +39 ° C within + 1 ° C. This model features automatic temperature compensation. An easy-to-read digital display helps you monitor operating conditions. Also it features cover interlock, rotor shaft protection and warning indicators for safety-hazards such as refrigeration failure, rotor imbalance, and brush wear.
|