Model 20-600 Portable Binary Gas Analyzer

Instruments - Gas Analyzers

Series 1200 Trace Nitrogen in Argon Analyzer

Applications include: Air separation plants, cryogenic truck loading stations, specialty gas laboratories, new line certification, cryogenic steel manufacturing, chemical plants, gas management/monitoring systems, quality control for truck fills and gas cylinders, process control, welding gas management, semiconductor manufacturing.

Available in three CE approved configurations: 0-10/0-100 parts per million (ppm), 0-2/0-20 ppm, 0-20/0-200 ppm
Guaranteed 10 ppb sensitivity
Measuring system based on spectral emission of argon plasma
Exceptional detector performance by utilizing patented electro-optical modulation
On-line continuous trending
Fast response…fast recovery
Ambient temperature limits: 16-35 °C
Display: LED digital
Sensitivity: ± 0.01 ppm
Output: 4-20 mA
Dry contacts for over-range protection and range selection indication
Non-depleting cell for extended operation
No valves, columns, or carrier gas
No radioactive source
Installation: bench or 19” rack
Power: 115-230 V, 50-60 Hz

Series 1300 Trace Nitrogen in Helium Analyzer

Applications include: Helium purification plants, cryogenic truck loading stations, specialty gas laboratories, process control, new line certification, chemical plants, gas management/monitoring systems, quality control for truck fills & gas cylinders, welding gas management, semiconductor manufacturing

Available in two CE approved configurations: 0-2/0-20 parts per million (ppm) and 0-20/0-200 ppm
Guaranteed 10 ppb sensitivity
Measuring system based on spectral emission of argon plasma
Exceptional detector performance by utilizing patented electro-optical modulation
On-line continuous trending
Fast response…fast recovery
Ambient temperature limits: 16-35 °C
Display: LED digital
Sensitivity: ± 0.01 ppm
Output: 4-20 mA
Dry contacts for over-range protection and range selection indication
Non-depleting cell for extended operation
No valves, columns, or carrier gas
No radioactive source
Installation: bench or 19” rack
Power: 115-230 V, 50-60 Hz

Series 1400 Trace Moisture in Argon Analyzer

Applications include: air separation plants, argon purification plants, cryogenic truck loading stations, specialty gas laboratories, process control, new line certification, cryogenic steel manufacturing, chemical plants, gas management/monitoring systems, quality control for truck fills & gas cylinders, welding gas management, semiconductor manufacturing

Available in two CE approved configurations: 0-2/0-20 parts per million (ppm) and 0-5/0-50 ppm
Guaranteed 10 ppb sensitivity
Measuring system based on spectral emission of argon plasma
Exceptional detector performance by utilizing patented electro-optical modulation
Cannot “blind” the instrument
On-line continuous analysis
Fast response
Recovers quickly from high moisture levels
No permanent degradation of detector due to high moisture levels
Extreme periods of acute dryness will not affect response or detector
4-20 mA output
Dry contacts for over range indication
Dry contacts for range selection indication
No valves, columns, or carrier gas
No radioactive source
Installation: bench or 19” rack
Power: 115-230 V, 50-60 Hz

Series 900 Toxic Gas Analyzer

GOW-MAC's Series 900 Toxic Gas Analyzer is a highly selective and precise analytical instrument engineered for quantifying trace amounts of toxic gases in industrial gas applications.

The principle of this automated, fully digital instrument is based on aqueous scrubbing of the target gas by a coil sampler coupled with a gas-liquid separator, followed by derivatization of the analyte to form a highly light-absorbing chromophore in an on-line reactor. The derivative then is quantified by a colorimetric detector.

Any gas species with potential to be derivatized can be determined by the Series 900 Toxic Gas Analyzer; e.g.: HF, NH 3 , H 2 CO, HONO, HCl, SO 2 , H 2 S, HCHO and aldehydes, etc. The Analyzer is not only able to determine trace level toxic gases in air, but also to quantify the ppb/ppm level impurities in industrial processing and electronic gases, such as N 2 , N 2 O, NF 3 , CxHy, etc. Custom applications based on your specific needs are available for evaluation by request.

Features

Colorimetric detector
Internal sample pump
Adjustable flow rate and light intensity
4-20 mA or voltage output
19” rack mounted design
Detection range of 5 ppb to 10 ppm (application dependent)

Series 200ACE Acetaldehyde Analyzer

Meets ISBT Method 11 criteria for selective measurement of acetaldehyde in CO 2

Rugged, low cost, low maintenance, turn-key system
Capable of PC-based control and data logging
Batch or continuous stream monitoring
Detector: Flame Ionization Detector (FID)
Automatic, hands-free calibration, flow setting and analysis
Detection limits for acetaldehyde of < 30 part-per-billion (ppb)
Instrument operating temperature: ambient
Detector temperature: factory set; adjustable
Oven temperature regulation: factory set with software controlled conditioning
Tested against virtually all of the potential alcohol and oxygenate impurities that could be present and determined to be interference-free
Acetaldehyde is captured by the software system, with results displayed digitally on the instrument's front panel
On-board software package contained in the Series 200ACE allows complete unattended operation
Installation: bench or 19” rack
Power: 115-230 V, 50-60 Hz

Series 200AHC Aromatic Hydrocarbon Gas Analyzer

Meets all ISBT Method 12 criteria for selective measurement of benzene in CO 2

Rugged, low cost, low maintenance, turn-key system
Capable of PC-based control and data logging
Batch or continuous stream monitoring
Detector: Photoionization Detector (PID)
Automatic, hands-free calibration, flow setting and analysis
Detection limits for benzene of < 5 ppb
Instrument operating temperature: ambient
Detector temperature: factory set; adjustable
Oven temperature: factory set with software controlled conditioning
Tested against virtually all of the potential alcohol and oxygenate impurities that could be present and determined to be interference-free
Benzene is captured by the software system with results displayed digitally on the instrument's front panel
On-board software package contained in the Series 200AHC allows complete unattended operation
Installation: bench or 19” rack
Power: 115-230 V, 50-60 Hz

Series 200BTEX Gas Analyzer

Meets all ISBT Method 12 criteria for selective measurement of BTEX (benzene, toluene, ethyl benzene, o-xylene, m-xylene, and p-xylene) in CO 2

Rugged, low cost, low maintenance, turn-key system
Features: Auto-Calibration, Auto-Calibration Validation, Process/Manual mode, As Found/As Left function, Sample stream selection, and six 4-20 mA outputs
Capable of PC-based control and data logging
Batch or continuous stream monitoring
Detector: Photo Ionization Detector (PID)
Automatic, hands-free calibration, flow setting and analysis
Detection limits for benzene of < 5 ppb
Instrument operating temperature: ambient
Detector temperature: factory set; adjustable
Oven temperature: factory set with software controlled conditioning
Tested against virtually all of the potential alcohol and oxygenate impurities that could be present and determined to be interference-free
Benzene is captured by the software system, with results displayed digitally on the instrument's front panel
On-board software package contained in the Series 200AHC allows complete unattended operation
Installation: bench or 19” rack
Power: 115-230 V, 50-60 Hz

Series 200BXA BTEX in Air Analyzer

Selective measurement of BTEX (benzene, toluene, ethyl benzene, o-xylene, m-xylene, and p-xylene) in air

Rugged, low cost, low maintenance, turn-key system
Features: Auto-Calibration, Auto-Calibration Validation, Process/Manual mode, As Found/As Left function, Sample stream selection, and six 4-20 mA outputs
Capable of PC-based control and data logging
Batch or continuous stream monitoring
Uses proprietary Photo Ionization Detector (PID)
Automatic, hands-free calibration, flow setting and analysis
Detection limits for benzene of < 5 ppb
Instrument operating temperature: ambient
Detector temperature: factory set; adjustable
Oven temperature: factory set with software controlled conditioning
Tested against virtually all of the potential alcohol and oxygenate impurities that could be present and determined to be interference-free
Benzene is captured by the software system, with results displayed digitally on the instrument's front panel
On-board software package contained in the Series 200AHC allows complete unattended operation
Installation: bench or 19” rack
Power: 115-230 V, 50-60 Hz

Series 200SA Sulfur Analyzer

Meets ISBT Methods 13 and 14 criteria for selective measurement of total sulfur content (TSC), total sulfur content excluding SO2 (TSC*) measurements, and speciating SO 2 from other sulfur impurities in beverage grade, vaporized,
liquid CO 2

Rugged, simple to use, low maintenance
Batch or continuous stream monitoring
Automatic, hands-free calibration, flow setting and analysis
Rack mount or bench-top
Detector: Flame Photometric Detector (FPD)
Auto-Calibration and sample introduction
Capable of PC-based control and data logging
Detection limits for all sulfurs of < 5 ppb
Instrument operating temperature: ambient
Detector temperature: factory set; adjustable
Oven temperature: factory set with software controlled conditioning
Sulfur is captured by the software system, with results displayed digitally on the instrument's front panel
Provides rapid, interference-free identification of all common, volatile sulfur-containing compounds (VSC) including H 2 S, COS, SO 2 , and CH 3 SH in beverage grade, vaporized, liquid CO 2
Each sulfur species is captured by the software system, with results displayed digitally on the instrument's front panel
Installation: bench or 19” rack
Power: 115-230 V, 50-60 Hz

Total Hydrocarbon Analyzers
Models 23-550-1 and 23-750-1 w/ Catalytic Methanizer

Ideal quantitative instruments for ambient air analysis, petrochemical industries, gas manufacturers and various other chemical industries, engine exhaust monitoring, stack gas emissions and environmental studies

Continuous ppm and sub-ppm measurement of hydrocarbons and CO and CO 2 in gas streams
Two Models: 23-550-1 or 23-750-1 with Catalytic Methanizer
Operates on 100% H 2 , 40/60% H 2 /N 2 or H 2 /He Fuel Mixes
Detector: Flame Ionization Detector (FID)
Individual Flow Control Systems
Pneumatic controls
3 Ranges: 00.00 ppm to 199.00 ppm (0.01999%), 000.0 ppm to 1999.9 ppm (0.19999%), 0000 ppm to 19,999 ppm (1.9999%)
Resolution of 0.1 ppm (23-550-1) total hydrocarbons over normal temperature ranges using zero grade H 2 as fuel (0.03 ppm on the 23-750)
Output: Digital Meter, 4½ digit LED, 100 mV recorder terminal (standard); 4-20 mA output (standard); Hi or Hi/Low alarms (optional)
Pump Assembly (optional)
Safety: flame-out indication with automatic fuel and sample line shut off
Installation: bench or 19” rack
Power: 115-230 V, 50-60 Hz

Series 23-550-BG Total Hydrocarbon Gas Analyzer for Beverage Grade CO2

Continuously measure concentrations of total volatile hydrocarbons (THA) in beverage-grade CO 2 gas and vaporized liquid streams pursuant to ISBT Method 10.0 criteria.

Operates on 100% H 2 , 40/60% H 2 /N 2 or H 2 /He Fuel Mixes
Individual Flow Control Systems
3 Ranges: 0.0 ppm to 99.99 ppm, 0.0 ppm to 999.9 ppm, 0.0 ppm to 9,999 ppm
Sample introduction via a vaporized liquid CO 2 source, pressurized tanks and/or individual sample cylinders
Flame Ionization Detector (FID)
Individual Flow Control Systems
Pneumatic controls
Operating Temperature: 25 °C ± 10 °C
Resolution of 0.1 ppm v/v total hydrocarbons over normal temperature ranges using zero grade H 2 as fuel
Safety: flame-out indication with automatic fuel and sample line shut off
Installation: bench or 19” rack
Power: 115-230 V, 50-60 Hz

50 Series Continuous Duty Gas Analyzer

Designed for continuous sampling and quantitative analysis of binary process streams of industrial gases and other gas mixing, cylinder identification, and atmosphere control applications.

Applications: Binary gas mixes containing H 2 , He, O 2 , Ar, CO 2 , Air, N 2 , NH 3 , Freon; Helium reclamation, helium purification systems, helium transfill guard systems, to name just a few. Contact us to request a full list.

Custom designed to meet client specifications
Detectors: thermal conductivity detector (TCD) or discharge ionization detector (DID)
Temperature regulated TCD enables continuous monitoring applications with minimum zero drift
Optimized, Self-Contained Gas Flow System
Choice of standard, corrosion resistant or all stainless steel system
Ambient operating temperature: 0-49 °C
Detector temperature: 100 °C, factory set (TCD); 70 °C , factory set (DID)
Sensitivity: application dependent
Purgeable Housing (optional)
Class 1, Div 1, Group B, C, D and Class 1, Div 2, Group B, C, D available systems
Installation: bench or 19” rack mount
Power: 115-230 V, 50-60 Hz

Custom Applications
We specialize in manufacturing custom engineered Analyzers, therefore, we ask you to give us your specific application parameters in order to quote the appropriate Analyzer for your needs. Click the "View Custom Application Data Sheet" link to reveal our form.

20 Series Binary Gas Analyzer

Designed for non-continuous sampling and quantitative analysis of binary process streams of industrial gases and other gas mixing, cylinder identification, and atmosphere control applications.

Typical Binary Gas Applications
NH 3 in Air • H 2 in N 2 • Argon in Helium • H 2 in O 2 • CO 2 in N 2 (flue gas) • Methyl bromide in Air • CO 2 in Helium • Natural gas in Air • Freon in Air • N 2 in Argon • Helium in Air • O 2 in Air • Hydrocarbons in He • O 2 in H 2 • SO 2 in Air • F 2 in N 2 •
... and many others

Designed as either a single or a dual pass unit
Purgeable housing (optional)
Single pass Analyzer — hermetically sealed reference thermal conductivity detector (TCD)
Dual pass Analyzer — flowing reference TCD
Pump (optional)
Gas selection manifold for zero, calibration, and sample gases
Optimized, Self-Contained Gas Flow System
Choice of standard, corrosion resistant or all stainless steel system
Ambient operating temperature: 0-49 °C
Detector temperature: 100 °C, factory set (optional)
Temperature regulation (optional)
Sensitivity: application dependent
Class 1, Div 2, Group B, C, D available systems
Installation: bench or 19” rack mount
Power: 115-230 V, 50-60 Hz

Custom Application Data Sheet
We specialize in manufacturing custom engineered Analyzers, therefore, we ask you to give us your specific application parameters in order to quote the appropriate Analyzer for your needs. Click the "View Custom Application Data Sheet" link to reveal the form.